Dekmax Blog: Utah Decks
News, Articles and Information from Dekmax
Waterproofing Roofing Membrane for Exterior Bonded Tiles
Oct 13, 2009
There is nothing like the look of tile or slate on that outdoor deck. Unfortunately, the beauty is soon forgotten if water makes its way into your home from the deck, thorugh the tile. It is then clear that most of the attention was given to the appearance rather than proper waterproofing techniques, when the tile was first installed. The resulting repairs can be intrusive and expensive when the cost of replacing the tile is considered.
This is a common story. There seems to be a lack of understanding within the building community about the proper waterproofing of decks, balconies and roof decks that are overlaid with porcelain tile, slate or some of the other natural stone finishes.
A failed tile deck or balcony is a common occurrence. There are two main types of failures; problems with the tile overlay such as eruptions or cracking and problems with the structure such as leaks into the building and rot. In most cases, the source of the failure is the lack of understanding of the properties and the limitations of the materials being used:
1. Inadequate waterproofing: There are many 'waterproof products' yet they are being installed incorrectly. A knowledgeable contractor is more important that a good product. Poor waterproofing can have far more expensive consequences than just repairing the tile if it involves rot repairs from a water leak.
2. Waterproofing membrane which is soft allows too much deflection: Any acceptable material must be firm enough under all temperatures to support the tile overlay. Many decks are waterproofed with 'Modified Bitumen' roofing membranes that get soft in hot weather which may allow tile to crack. Any suitable product will be tested with a Robinson Floor tester to meet ASTM C-627
3. Tile is installed with no provision of expansion: There is a recommendation by the tile association of expansion joints every 8-10 feet in any direction. If the tile has no room to expand, tiles will crack or lift.
waterproofing membrane which allows too much deflections.
A properly installed waterproof tiled deck would look like this:
» Return to Main Page » Go to Blog
When it comes to your home and property, don't settle for less than the best.
Request a quote from our trained installers or contact us anytime for details.
Featured Builder
Customer Testimonials
14 years ago when building my home in South Jordan, Utah, I was looking for a product to cover two second-floor outside decks. I found the Duradek product through a building magazine and convinced my general to use it. The alternatives were expensive and had short life spans of 5 to 8 years in Utah’s demanding climates. It has now been almost 14 years and the product has worn like iron with some color fading but no tears, rips or worn down spots and it still fends off the snow and rain like it did when it was originally installed. I would recommend it to anyone looking to cover outside decking for a finished look that holds up to the Utah climate changes.
Russell - South Jordan, Utah
Dekmax Blog
Finished pictures of the BSU Student Union Roof Top, soon to become a garden for the students to grow vegetables. This pictures correspond to the post of July 12, 2010 "BSU Roof ...
COST more important than PRICE
Aug 02, 2010
We have been through this so many times but for many customers it is the catalyst to making a purchase so we visit it again.When you are talking about something as serious as ...
BSU Roof Top Garden
Jul 13, 2010
Boise State University Student Union Building has begun making some beautiful changes. The roof itself has had some water problems and they were exploring the idea of how to ...